TENI – Simple installation and invisible fixing
The TENI fixing clip for invisible fixing consists of a UV and weather-resistant POM plastic material, which is optimised for use outdoors and is approved for all häussermann thermally modified decking boards.
The TENI fixing system offers fast installation without additional installation tools. Individual decking boards can be replaced at any time. Constructive wood protection is ensured by the 8 mm rear ventilation between the substructure and decking board, which is created by the clip. Waterlogging also cannot occur in the grooves. In decking fitted with the TENI installation clip, every board works for itself, no chain reactions can be created over the surface. The A2 universal screws supplied are suitable for softwood and hardwood substructures.
Quick and easy installation
Separate initial part at the predetermined breaking point and place underneath the first board. For all board widths < 120 mm, one initial part is sufficient; for board widths > 120 mm, we recommend placing two initial parts underneath.
Place TENI clip in the groove.
Insert the screws at an angle of approx. 65° and turn them until a 6 mm joint is created.
Put the next row of boards in place.
Separate the final part at the predetermined breaking point and place underneath the last board. For all board widths < 120 mm, one final part is sufficient; for board widths > 120 mm, we recommend placing two final parts underneath.
When forming a butted decking joint, we recommend using a double substructure.
Simple replacement of individual decking boards
To replace a board, you only need a simple lever tool. Apply the lever tool and remove the board.
Click the board back in place.
This may be of interest to you
